MIK-RD902 26GHz Radar level meter
-
Specification
| Product | Radar level meter |
| Model | SUP-RD902 |
| Measure range | 0-30 meters |
| Application | Liquid |
| Process Connection | Thread, Flange |
| Medium Temperature | -40℃~130℃(Standard type), -40℃~250℃(High temp type) |
| Process Pressure | -0.1~4.0MPa |
| Accuracy | ±5mm ~±10mm |
| Protection Grade | IP67 |
| Frequency Range | 26GHz |
| Signal Output | 4-20mA/HART (Two-wire/Four) |
| RS485/Modbus | |
| Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
The 26GHz radar level meter is an advanced technology used for measuring the level of liquids and solids in tanks and containers. This device operates on a frequency of 26GHz, which provides superior accuracy and reliability compared to other types of level measurement systems.
The radar level meter uses electromagnetic waves to determine the distance between the sensor and the surface of the material being measured. The waves are emitted from the sensor and bounce back off the surface of the material, allowing the device to calculate the level of the substance in the tank or container.
This technology is particularly useful in industries such as chemical processing, food and beverage production, and pharmaceuticals, where accurate level measurement is critical for ensuring product quality and safety. The 26GHz radar level meter is also highly resistant to interference from external factors such as temperature, pressure, and humidity, making it a reliable choice for a variety of applications.
In addition to its accuracy and reliability, the 26GHz radar level meter is also easy to install and operate. Its compact design allows it to be installed in tight spaces, and its user-friendly interface makes it simple to set up and calibrate.
Overall, the 26GHz radar level meter is a highly advanced and effective technology for measuring the level of liquids and solids in tanks and containers. Its superior accuracy, reliability, and ease of use make it a popular choice for a wide range of industries.
-
Product Size
-
Radar level transmitter installation
 |
 |
 |
| Be installed in the diameter of the 1/4 or 1/6.
Note: The minimum distance from the tank wall should be 200mm. Note: ① datum ②The container center or axis of symmetry |
The top conical tank level, can be installed at
the top of the tank is intermediate, can guarantee the measurement to the conical bottom |
A feed antenna to the vertical alignment surface.
If the surface is rough, stack angle must be used to adjust the angle of cardan flange of the antenna to the alignment surface. (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.) |
